This air-assist module comes with an attached G8 lens. This air assist nozzle works best with the Ortur laser master engraving machines.
Mounted G8 single element lens gives an increase in output compared with the 3-element lenses with a small reduction in beam quality.
Product Designer: Chatura Dinesh Halwatura
This module is compatible with Ortur Laser Master 1 LM1 and Ortur Laser Master 2 LM2 machines.
This module is tested with the following laser modules.
Ortur Laser Master 2 - 20W, LU 1-4(20G05)
Ortur Laser Master 2 - 15W, LU 15W(20E13)
If you have the latest 2021 Ortur Laser Master 2 model, please do not purchase this air-assist module. Your laser module must be able to change lenses to mount this air-assist module. Fixed focus lenses come with the latest 2021 models.
Air Assist Nozzle with G8 Miracle Lens Features
Weight - 15g (Without silicone tube)
Focus Distance - 60mm from the aluminium heat sink to engraving surface
G8 Lens Features
- Large central aperture.
- Lens Material: Single element; Coated optical glass
- Lens Holder: 9mm x 0.5mm thread, 9mm length, brass
- EFL (Effective Focal Length):8.0mm
- CA (Central Aperture): 6.5mm
- SD (Diode to the lens): 5.67mm
- NA (Numerial Aperture): 0.60mm
- Coating: 400-700nm
This product is fully compatible with our laser beam focus module.
- 1x- Air assist module(G8 lens is Permanently mount)
- 1x - 2m long flexible silicone hose(ID - 4mm, OD - 6mm)
- 2x - hose clamps
- 1X - Y-Axis endstop extend plastic part. Follow the instruction here to mount this part.
Please follow the product documentation at "How to mount the air-assist module with G8 lens".
Air assist nozzle required constant pressure air pump. The large aquarium air pump is ideal for this purpose. we would recommend using 60 Litre/Min adjustable airflow aquarium pump.
You can use this air assist nozzle as only G8 lens without an air supply.
Recommended air pump (We do not supply air pump with this kit)
Hailea V60 Series Air Pump
Customs and import taxes
Buyers are responsible for any customs and import taxes that may apply. Expocnc on Demand not responsible for delays due to customs.